|
|
|
 |
Machine Dimensions |
| |
Overall Dimensions |
48 x 36 x 42 |
| Work Chamber:(working
dimensions) |
9 x 9 x 9 |
| Shipping Weight
(approximately) |
800 lbs |
|
|
Space Required for Machine |
| |
Actual machine
dimensions, plus 4 ft. maintenance access on all sides |
|
|
Facilities Required |
| |
Power @ 208 VAC/3ph/60hz: |
20 FLA |
| Chilled Water |
2 gpm. |
| N2 or Clean & Dry Air @
80 to 100 PSI |
10 cfh. |
| LN2 (will vary with
application) |
160 lpw. |
|
|
Solvent
Holding Tanks |
| |
Working Capacity: |
6 gallons |
| Heat: |
1.5KW |
|
|
Vacuum
Equipment |
| |
Polishing Pump: (Pumping Speed) |
1.2CM |
| Valves: |
Pneumatic
W/NW fittings. |
| Note: Vacuum pumps may be varied to provide faster cycle times, lower of
higher ultimate vacuum pressures or to meet local facilities requirements. |
|
|
Control
Panel |
| |
Primary control components shall
to housed in a mild steel control panel shall meet NEMA 12 specifications and be UL
listed. |
| Primary system
control shall be via a PLC Direct, model "205" logic controller. |
|
|
Materials of Construction |
| |
Frame & Enclosure: |
Carbon steel, powder coated with Unique
standard colors |
| Vacuum/Work Chamber: |
Stainless steel |
| Wetted Plumbing: |
Stainless steel or Teflon |
| Liquid Solvent Pumps: |
Stainless steel of Ryton |
| Vacuum Pumps: |
Stainlees steel, Teflon or Ryton |
| Solvent Holding Tanks: |
Stainless steel |
| Vacuum Valves: |
Stainless steel |
|
|
Additional
Features: |
| |
Solvent recovery via cryogenic trap, carbon recovery or
scrubber, additional secondary condenser or a combination of two or more methods. |
| Either spray in immersion or ultrasonics is available to
enhance cleaning capabilities. |
| All cabinets are built with 110% liquid containment |
| Work chambers may be remote mounted. |
| Multiple work chambers may be used in one console. |
| System design allows for custom modifications. |
Back to top
For additional information please use our
Contact Form or visit our
Frequently
Asked Questions page.
|
info@uniqueequip.com
